Tel: 360-805-5406 Fax: 360-805-2877 Email: admin@ellardinstrumentation.com
Tel: 360-805-5406   Fax: 360-805-2877Email: admin@ellardinstrumentation.com


[Top]

Horizontal Mini-Gel Units

•  Accommodates large buffer volumes in proportion to gel size.
•  Permits short rapid runs without need for recirculating buffer.
•  Cast gels directly on platform, or use UVT plastic plates.
•  HMG 34 accommodates two combs for simultaneous double runs.
•  Each unit comes with gels casting platform, two glass slides, one comb, regular
cover, leads and rubber feet.
•  Optional combs can be substituted for the difference in cost. Please specify
Thickness when ordering.

Model # Comb Gel Area Buffer Volume Price
HMG 34 10T 3.25" x 4" 600 ml $330.00
HMG 23 8T 2" x 3" 400 ml $320.00

 


[Top]

Mini-Gel Accessories

Mini-Gel Casting Platforms
These gel platforms are made of Ultra-violet transmitting acrylic and allow for additional
gels to cast outside box.
•  Easily inserted into unit
•  Delrin
®
gates can be raised to pour deep gels, and lowered to run gels.
•  Place on Ultra-violet light for examination and photography without removing gel.

Model # Size Price
HMG 34 GCP 3.25" x 4" $60.00
HMG 23 GCP 2" x 3" $53.00

 

Mini-Gel Displacement Blocks
These 1/2" acrylic blocks allow for runs using 50% less buffer. Blocks fit under each side of
the Gel casting platform. Platform legs captivate BDB in locator notches.

Model # Size Buffer Volume Price/Set
HMG 34 BDB 3.25" x 4" 300 ml $27.00
HMG 23 BDB 2" x 3" 200 ml $27.00

 

Optional Buffer Recirculating Ports
Elbow fittings and 3/8" I.D. hose connectors allow for connections between reservoirs and
buffer circulation using an external pump. Two ports per gel box. Unit required for
installation. HMG BCP --- $20.00

Mini-Gel Glass Plates
Glass slides 1mm thick.

 

Model # (doz.) Size Price
HMG 34 GP 3.25" x 4" $24.00
HMG 23 GP 2" x 3" $11.00

 

Mini-Gel UVT Plastic Plates
Ultra-Violet Transmitting acrylic 1mm thick.

 

Model # Size Price
HMG 34 UVTP 3.25" x 4" $4.00
HMG 23 UVTP 2" x 3" $3.00

 

Mini-Gel Replacement Parts

 

Model # Size Price
HMG 34 Gates (2) 4" x ¼" $14.00
HMG 23 Gates (2) 3" x 1/4" $14.00
HMG Screws Set of 4 $1.00
HMG Comb Pins Each $5.00

 

Mini-Gel Scoops
 

Model # Size Price
HMG 34 GS 3.25" x 4" $14.00
HMG 23 GS 2" x 3" $14.00


[Top]

Mini-Gel Combs
•  Made of 1/4 inch Delrin® and milled to size.
•  Prep combs available in two styles. Prep #1 has one tooth with end marker lanes.
•  Prep #2 has two teeth with one middle and end marker lanes.
•  Microtiter combs are used with 8-multichannel pipetters. (4.5mm spacing loads
every second well)
•  Volume of Well: Tooth Width x Comb Thickness x 1mm = Comb Well Volume in
microliters per 1mm of insertion.

HMG 23 Combs
Model # Description Teeth Width Thickness Price
HMG 23 Prep #1 One tooth, 2 marker lanes 36.7mm/2.3mm 1.5mm $25.00
HMG 23 Prep #2 Two teeth, 3 marker lanes 15.6mm/2.3mm 1.5mm $25.00
HMG 23 5T 5 Square Teeth 7.6mm (0.8, 1, 1.5mm) $27.00 
HMG 23 8T 8 Square Teeth 4.2mm (0.8, 1, 1.5mm) $29.00
HMG 23 10T 10 Square Teeth  3.1mm  (0.8, 1, 1.5mm) $30.00 
HMG 23 12T 12 Square Teeth 2.3mm (0.8, 1, 1.5mm) $31.00

HMG 34 Combs
Model # Description Teeth Width Thickness Price
HMG 34 Prep #1 One tooth, 2 marker lanes 68.3mm/2.3mm 1.5mm $29.00
HMG 34 Prep #2 Two teeth, 3 marker lanes 31.6/2.3mm 1.5mm $29.00
HMG 34 10T 10 Square Teeth 6.2mm  (0.8, 1, 1.5mm)  $30.00 
HMG 34 12T 12 Square Teeth 5mm  (0.8, 1, 1.5mm)  $31.00 
HMG 34 15T 15 Square Teeth 3.7mm (0.8, 1, 1.5mm)  $33.00 
HMG 34 MT 17T 17 Microtiter Square Teeth: 4.5m spacing for multi-channel pipetters (loads every second well) 3mm  (0.8, 1, 1.5mm)  $35.00 
HMG 34 20T 20 Square Teeth 2.8mm  (0.8, 1, 1.5mm)  $35.00 

Multiple Gel Casting Platform

 

Cast agarose gels simultaneously, on 2" x 3" glass slides. Easy
removal of slide through bottom finger hole. Combs and
versitile comb holders can be used to cast 2" wide or 3" wide
gels. Gels can be run in any horizontal electrophoresis system.

Unit includes: Six 2" x 3" slides; three comb holders, and six
medium clips.

 

HMG 23-6 GCP -- 171.00

HMG 23-6 Combs

Please specifiy thickness when ordering.

2" Length

Model # Thickness Price
HMG 23-6 8T (0.8, 1.0, 1.5mm) $14.00
  (0.8, 1.0, 1.5mm)  $14.00
   
3" Length
 HMG 23-6 12T (0.8, 1.0, 1.5mm)  $14.00 
 HMG 23-6 15T (0.8, 1.0, 1.5mm)  $14.00 
Print Print | Sitemap
© Ellard Instrumentation Ltd