Tel: 360-805-5406 Fax: 360-805-2877 Email: admin@ellardinstrumentation.com
Tel: 360-805-5406   Fax: 360-805-2877Email: admin@ellardinstrumentation.com

Vertical Sequencers

 

 

VS 1417 & VS 1422


•  Full width of a standard X-ray film.
VS 1417 usable gel area 14" wide x 17" tall.
VS 1422 provides 5 extra inches for longer runs. Usable gel area
14" wide x 22" tall.
•  Maintain Even Temperatures: 0.100" clear anodized aluminum heat
diffuser plate embedded in the gel support maintains an even
temperature over the surface of the glass. This method provides
excellent results, virtually eliminating the smile effect.
•  Buffer Drain Valves: Convenient push-open/ snap close valve for
easy disposal of buffer, with protective base. Standard with the VS
1422. Available for VS 1417 at additional cost.
•  Sturdy Construction: These large vertical sequencing units are
constructed with 3/8" cast acrylic for the upright supports and base,
and 1/4" cast acrylic back braces provide additional strength. Top and
bottom reservoirs are made of 1/4" cast acrylic.
•  Accessories Included: one set glass plates, clips and leads, and
cover.

Model # Usable Gel Area Price
VS 1422 14" wide x 22" tall, buffer drains standard $825.00
VS 717 14" wide x 17" tall $745.00

 

 

 

 

VS 717 and VS 722

 

•  Half of the width of a standard X-ray film.
VS 717 usable gel area 7" wide x 17" tall.
VS 722 provides 5 extra inches for longer runs. Usable gel area 7" wide x 22" tall.
•  Maintain Even Temperatures: .100" clear anodized aluminum heat diffuser plate embedded in the gel support maintains an even
temperature over the surface of the glass. This method provides excellent results, virtually eliminating the smile effect.
•  Buffer Drain Valves: Convenient push-open/ snap close valve for easy disposal of buffer, with protective base. Standard with the
VS 722. Available for VS 717 at additional cost.
•  Sturdy Construction: These large vertical sequencing units are constructed with 3/8" cast acrylic for the upright supports and base, and 1/4" cast acrylic back braces provide additional strength. Top and bottom reservoirs are made of 1/4" cast acrylic.
•  Accessories Included: one set glass plates, clips and leads, and cover.

 

Model # Usable Gel Area Price
VS 722 7" wide x 22" tall, buffer drains standard $726.00
VS 717 7" wide x 17" tall $627.00

 

 

 

Buffer Drain Valves

 

These convenient push open - snap close
buffer drain valve assist in easy disposal of buffer. Drain valves
come with protective base. Must be installed to unit, prior to
shipping. 

Model # Price
VS 1417-BDV $60.00
VS 717-BDV $60.00

 

Vertical Sequencing Combs

 

•  Vinyl Combs: Precisely machined of rigid vinyl.
•  Color-coded: for different thickness. Please specify thickness when ordering.
•  Variety: of number of teeth, thickness' andstyles.
•  Microtiter Combs: For use with 8- or 12-multi-channel pipetters. 4.5mm spacing loads every second well; 3mm spacing loads every third well.

 

Volume of Well: Tooth Width x Comb Thickness x 1mm= Volume in miroliters per 1mm of insertion.

 
Color Code
Blue 0.3mm
White 0.4mm
Red 0.5mm
Yellow 0.8mm
Black 3.0mm
White 3.0mm
   

 

 

VS 1417 Combs

Model # Description Tooth Width Thickness

Price

VS 1417 20T 20 Square Teeth 16mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $29.00
VS 1417 36T 36 Square Teeth 8.2mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $40.00

VS 1417 44T

44 Square Teeth 6.5mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $47.00
VS 1417 56T 56 Square Teeth  4.6mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $53.00

VS 1417 72T

72 Square Teeth 3.3mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $55.00

 VS 1417 ST 58T

58 Sharksteeth

6mm space between teeth points

(0.2, 0.4, 0.5mm)  $47.00

 VS 1417 ST 86T

86 Sharksteeth

4mm space betweenteeth points

(0.2, 0.4, 0.5mm)  $53.00

VS 1417 Microtiter Combs

Model # Description Tooth Width Thickness Price
VS 1417 M/T 78T

78 Microtiter Sharksetth:

4.5mm spacing for multi-channel pipetters (loads ever second well)

4.5mm spacing between teeth points (0.2, 0.4, 0.5mm) $53.00
VS 1417 M/T ST 116T

116 Microtiter Sharksteeth:

3mm spacing for multi-channel pipetters (loads every third well)

3mm space between teeth points (0.2, 0.4, 0.5mm)  $60.00
VS 1417 MT 78T

     78 Microtiter Square Teeth:

  4.5mm spacing for multi-channel
 pipetters (loads every second well)

3mm  (0.2, 0.4, 0.5mm)  $53.00

VS 717 Combs

Model # Description Tooth Width Thickness Price
VS 717 10T  10 Square Teeth  16mm   (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $20.00
VS 717 18T  18 Square Teeth  8.2mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $27.00
VS 717 22T  22 Square Teeth  6.5mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $32.00
VS 717 28T  28 Square Teeth  4.6mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $37.00
VS 71736T  36 Square Teeth  3.3mm  (0.2, 0.4, 0.5, 0.8, 1, 1.5mm)  $40.00
VS 717 ST 29T  29 Sharkteeth  6mm space between teeth points  (0.2, 0.4, 0.5mm)  $37.00
VS 717 ST 44T  44 Sharkteeth  4mm space between teeth points  (0.2, 0.4, 0.5mm)  $40.00
 

VS 717 Microtiter Combs

Model # Description Tooth Width Thickness Price
VS 717 M/T ST 39T

 39 Microtiter Sharksteeth:

 for multi-channel pipetters (loads every third well)

 4.5mm space between teeth points (02., 0.4, 0.5mm)  $40.00
VS 717 M/T ST 58T  58 Microtiter Sharksteeth:

 for multi-channel pipetters (loads every third well)

 33 space between teeth points (02., 0.4, 0.5mm)   $47.00
VS 717 MT 39T

 39 Microtiter Square Teeth:

4.5mm spacing for multi-channel pipetters (loads every second well

3mm   (02., 0.4, 0.5mm)  $40.00

Vertical Sequencers Spacers

 

Our Vinyl 1/2" wide spacers have a silicone sponge block 1/16" taller than the difference in the glass plates. The compressed sponge block seals the space above the short plate and flushes spacer with bottom of glass sandwich. Sold in sets of two. Thickness of spacers should match your comb.

Standard Spacers

Model # Description Price
VS 1417 SS  Standard Spacers   $20.00
VS 1422 SS Standard Spacers    $21.00
VS 717 SS Standard Spacers   $20.00
VS 722 SS Standard Spacers   $21.00
WS-17 Wedge Spacer .4mm to 1mm  $28.00
0WS-22  Wedge Spacer .4mm to 1.2mm   $31.00

Bottom Spacers -- Additional $6.00
To order bottom spacer follow the SS or TS with a -B.
 
T-Spacers -- $14.00/Pair
To order T-Spacers substitute SS with TS in the Model #

Vertical Sequencers Glass Plates

 

Accurately cut to size with seamed edges. Sets of two 3/16" thick glass
plates. One long plate (3/4" longer than short plate) and one short plate
(length given). Lengths up to 30cm are 1/8" thick. Lengths 30cm and longer
are 3/16" thick. 

 

VS 717: Actual width 8-5/16"; Usable gel width 7". 
VS 1417: Actual width 15-1/8"; Usable gel width 14".

Model # Width x Length Price
VS 1417 GP 15-18" x 17" $33.00
VS 1422 GP 15-18" x 22" $37.00
VS 717 GP 8-5/16" x 17" $27.00
VS 722 GP

8-5/16" x 22"

$32.00

Half sets of plates can be purchased for half the standard price.

Simply indicate long or short after the catalog number.

 
 
Accessories

 Sponge Blocks self stick silicone blocks attach

 to long spacer, for sealing above short plate.

 Blocks are 1/16" thicker than glass plates.

 Please specify thickness of sponge block.

 

 SB (3/16, 1.4)

$0.50 

 Gaskets self stick silicone strips seal reservoir

 glass plates.  

 

 14cm Gasket

$8.00
Print Print | Sitemap
© Ellard Instrumentation Ltd