Tel: 360-805-5406 Fax: 360-805-2877
Email: admin@ellardinstrumentation.com
Where to Find Us:
Ellard Instrumentation Ltd
14253 169th Dr SE Suite 685
Monroe, WA 98272
Phone: (360) 805-5406
Fax: (360) 805-2877
• V3523: Usable gel width 35cm. Gel length: 23cm.
• 14cm Wide: Usable gel width 14cm. Gel lengths: 12cm or 20cm. Uses all 14cm combs, and spacers.
• Silicone Gasket around upper reservoir prevents buffer leakage without grease, and provides a good background to view sample wells while loading.
• Plain Glass Plates: Silicone sponge block spacers eliminate need for fragile notched plates.
• Solid Construction: Base and upright support made of 3/8" cast acrylic. Reservoirs made of 1/4" cast acrylic.
• Accessories Included: One set glass plates, clips, leads and standard cover.
| Model # | Usable Gel Area | Price |
| V 1412 | 14cm wide x 12cm tall | $723.00 |
| V 1420 | 14cm wide x 20cm tall | $813.00 |
| V 3523 | 35cm wide x 23cm tall | $1076.00 |
• Supports Gel Sandwich, vertically, while pouring gels.
• Seals bottom edges of glass.
• Cast two gels simultaneously.
• Simple to use:
1. Align spacers at edges between glass plates with silicone foam blocks over short plate. Creating glass sandwich.
2. Applying downward pressure against spacer's sponge block, sealing the space above short plate and flushing spacer with bottom of glass sandwich.
3. Place clips in center of spacer.
4. Center glass sandwich onto casting stand, so that clips clear each side of upright. Push sandwich into silicone foam seal and under holding brackets.
Interlocking Safety Cover
Interlocking Safety Cover- includes attached leads. To remove IC cover, leads must be disconnected, ensuring safety.
| Exchange regular cover for Interlocking Cover when ordering unit. |
|
| Model # | Price |
| V1412-ICX | $57.00 |
| V1420-ICX | $57.00 |
| V3523-ICX | $57.00 |
| Interlocking Cover as separate item. | |
| Model # | Price |
| V1412-IC | $95.00 |
| V1420-IC | $102.00 |
| V3523-IC | $118.00 |
| Replacement Regular Cover | |
| Model # | Price |
| V1412-RRC | $68.00 |
| V1420-RRC | $75.00 |
[Top]
14cm & V 3523 Combs
- Vinyl Combs: Precisely machined of rigid vinyl. Fit all Vertical 14cm units.
- Color-coded: Vinyl combs are color coded for different thickness. Please specify thickness when ordering.
- Variety of number of teeth, thickness' and styles.
- Prep combs come in two styles.
- Microtiter combs are used with 8- or 12-multichannel pipetters: 4.5mm spacing loads every second well; 3mm spacing loads every third well.
| Color | Code |
| Blue | 0.2mm |
| White | 0.4mm |
| Red | 0.5mm |
| Yellow | 0.8mm |
| White | 1.0mm |
| Black | 1.5mm |
| White | 3.0mm |
Volume of well: Tooth Width x Comb Thickness x 1mm = Comb Well Volume in microliters per 1mm of insertion.
| Model # | Description | Tooth Width | Thickness | Price |
| 14 Prep #1 |
one tooth, 2 markers lanes |
120mm/4mm | (1, 1.5 or 3mm) | $40.00 |
| 14 Prep #2 |
two teeth, 3 markers lanes |
56mm/4mm | (1, 1.5 or 3mm) | $44.00 |
| 14 10T | 10 Square teeth | 11mm | (.2, .4, .5, .8, 1, 1.5, 3mm) |
$40.00 |
| 14 12T | 12 Square teeth | 9mm | (.2, .4, .5, .8, 1,1.5, 3mm) | $42.00 |
| 14 20T | 20 Square teeth | 4.5mm | (.2, .4, .5, .8, 1.5, 3mm) |
$51.00 |
| 14 ST 22T |
22 Sharksteeth | 6mm space between teeth points |
(.2, .4, .5mm) | $53.00 |
| 14 ST 34T |
34 Sharksteeth | 4mm space betwen teeth points |
(.2, .4, .5mm) | $58.00 |
| Model # | Description | Tooth Width | Thickness | Price |
| V 3523 20T | 20 Square Teeth | 16mm | (.08, 1, 1.5mm) | $57.00 |
| V 3523 36T | 36 Square Teeth | 8.2mm | (.08, 1, 1.5mm) | $75.00 |
| V 3523 44T | 44 Square Teeth | 6mm | (.08, 1, 1.5mm) | $81.00 |
| V 3523 56T | 56 Square Teeth | 4.5mm | (.08, 1, 1.5mm) | $95.00 |
Microtiter Combs: For use with 8- or 12- multichannel pipetters: 4.5 mm spacing loads every second well;
3mm spacing loads every third well. Fit all Vertical 14cm units
| Model # | Description | Tooth Width | Thickness | Price |
| 14 MT 30T | 30 Microtiter Square Teeth: 4.5mm spacing for multichannel pipetters (Loads every second well) |
3mm | (.2, .4, .5mm) |
$70.00 |
| 14 MT ST 30T | 30 Microtiter Sharkteeth: for multi-channel pipetters (Loads ever second well) |
4.5mm spacing between teeth points |
(.2, .4, .5mm) |
$74.00 |
| 14 MT ST 45T | 45 Microtiter Sharkteet: for mulit-channel pipetters (Loads every third well) |
3mm spacing between teeth points |
(.2, .4, .5mm) |
$77.00 |
| Standard Spacers | ||
| Model # | Description | Price |
| 14 SS 12 | 12cm Standard Spacers | $37.00 |
| 14 SS 15 | 15cm Standard Spacers | $40.00 |
| 14 SS 20 | 20cm Standard Spacers | $45.00 |
| 14 SS 30 | 30cm Standard Spacers | $52.00 |
| 14 SS 40 | 40cm Standard Spacers | $58.00 |
| 14 SS 43 | 43cm Standard Spacers | $62.00 |
| V 3523 SS | V 3523 Standard Spacers | $53.00 |
| Bottom Spacers -- Additional $12.00 | ||
|
To order bottom spacer follow the SS or TS with a -B. |
||
| T-Spacers -- $28.00/Pair | ||
|
To order T-Spacers substitute SS with TS in the Model # |
||
[Top]
14cm Glass Plates
Accurately cut to size with seamed edges. Sold in sets of two. One long plate (3/4" longer than short plate) and one short plate (length given). Lengths up to 30cm are 1/8" thick. Lengths 30cm and longer are 3/16" thick. Actual width 17cm. Usable gel width 14cm.
| Model # | Width x Length | Price |
| 14 GP 12 | 17cm x 12cm | $41.00 |
| 14 GP 15 | 17cm x 15cm | $48.00 |
| 14 GP 20 | 17cm x 20cm | $56.00 |
| 14 GP 30 | 17cm x 30cm | $64.00 |
| 14 GP 40 | 17cm x 40cm | $72.00 |
| 14 GP 43 | 17cm x 43cm | $79.00 |
|
Half sets of plates can be purchased for half the standard price. Simply indicate long or short after the catalog number. |
||
|
Accessories |
||
|
Sponge Blocks self stick silicone blocks attach to long spacer, for sealing above short plate. Blocks are 1/16" thicker than glass plates. Please specify thickness of sponge block. SB (3/16, 1.4) |
$1.00 | |
|
Gaskets self stick silicone strips seal reservoir glass plates. 14cm Gasket |
$22.00 | |
V 3523 Glass Plates
| V 3523 GP 1/8 | 1/8" | $48.00 |
| V 3523 GP 3/16 | 3/16" | $56.00 |
14cm Diffuser Plates
Maintain even temperatures with aluminum heat diffuser plates placed behind the glass sandwich. This method gives excellent results, virtually eliminating the "smile" effect. Made of 0.100" clear anodized aluminum.
| Model # | Width x Length | Price |
| 14 DP 20 | 17cm x 12.8cm | $50.00 |
| 14 DP 30 | 17cm x 22.5cm | $55.00 |
| 14 DP 40 | 17cm x 32.7cm | $59.00 |
| 14 DP 43 | 17cm x 35.8cm | $63.00 |
V 3523 Diffuser Plates... $30.00
[Top]
Leads
Made of 18 gauge wire with the finest quality rubber insulation. Leads can be fitted with piggy back plugs for an additional cost. Piggy back plugs allow multiple parallel connections from the same power source.
| Model # | Description | Price/Pair |
| SD60-L | Standard 60" leads |
$103.00 |
| CL60-L | Coiled 8" leads extend to 60" | $124.00 |
| PB-Plug | Piggy back banan plug | $22.00 |
[Top]
Clips
Binder Clips with plastidip handles are easy on the hands and the glass plates when flipped back.
| Model # | Description | Price/Dozen |
| Lrg-Clp | 1" capactiy | $24.00 |
| Med-Clp | 1/2" capacity | $19.00 |
| sm-Clp | 3/8" capacity | $16.00 |
[Top]
Gaskets
Self stick silicone strips seal reservoir glass plates
| Model # | Description | Price |
| V14/ VA 1443 | 14cm | $22.00 |
| Model # | Description | Tooth Width | Thickness | Price |
| V 3523 MT 39T |
39 Microtiter Sharkteeth: for multi-channel pipetters |
7.5mm spacing between teeth points |
(0.8, 1, 1.5mm) |
$50.00 |
| V 3523 MT 78T |
78 Microtiter Sharkteeth: for multi-channel pipetters |
3mm spacing between teeth points |
(0.8, 1, 1.5mm) |
$58.00 |
Teflon Combs: Precisely machined of Teflon and deburred by hand. Fit all
Vertical 14cm units.
| Model # | Description | Tooth Width | Thickness | Price |
| Tef 14 10T | 10 Square Teeth | 11mm | (.2, .4, .5, .8, 1, 1.5mm) | $44.00 |
| Tef 14 12T | 12 Square Teeth | 9mm | (.2, .4, .5, .8, 1, 1.5mm) | $47.00 |
| Tef 14 16T | 16 Square Teeth | 6mm | (.2, .4, .5, .8, 1, 1.5mm) | $51.00 |
| Tef 14 20T | 20 Square Teeth | 4.5mm | (.2, .4, .5, .8, 1, 1.5mm) | $53.00 |
14cm/ V3523 Spacers
Our vinyl 1/2" wide spacers have a silicone sponge block 1/16" taller than the difference in the glass plates. The compressed sponge block seals the space above the short plate and flushes spacer with bottom of glass sandwich. Sold in sets of two. Thickness of spacers should match your comb.
Print 